ACA Monthly Reporting Checklist

ACA Monthly Reporting Checklist

Use this checklist to review your ACA data throughout the year, ideally once a month. Each review looks back at one period, such as last month, and confirms that every employee event in that period was recorded correctly and that no compliance alerts are left open. Small corrections made each month prevent large corrections at year end.

Info
How this fits with the Year-End checklist. The ACA Year-End Reporting Checklist assumes this monthly work is done. This checklist keeps each employee's data accurate as the year goes: benefit profiles, ACA profiles, pay rates, benefit plans, and timelines. The Year-End checklist then confirms company-level information, reviews the full year, and covers form review and filing.

The review has two parts. Part One works through the employee events from the period you are reviewing. Part Two uses the ACA Data Summary report to catch anything Part One missed and to see what is coming next month.

How Often to Review

We recommend completing this checklist every month for the month that just ended. For example, in early November you would review everything that happened in October. If you review quarterly instead, review each month in the quarter separately, because the IRS reports and assesses coverage month by month.

Some events should be handled when they happen instead of waiting for your next review:

EventWhy it can't waitWhere it's covered
New hire or rehire eligible for benefitsCoverage must be offered by the end of the waiting periodSteps 1–5
Part-time to full-time changeThe employee may need an offer of coverage within the waiting periodSteps 1–3, 5
Termination or full-time to part-time changeCoverage and eligibility end dates affect every following monthSteps 1–3, 5
Pay rate decrease (Rate of Pay safe harbor only)A lower rate can make coverage unaffordableStep 4
End of a measurement periodEmployees who tested full-time must be offered coverage for the stability periodStep 7
Open enrollmentNew elections and waivers must be recorded before the plan year startsStep 5

Checklist at a Glance

Part One: Review this period's employee events

  1. List every hire, rehire, termination, and status change in the period.
  2. Confirm each employee's ACA Profile and its effective date.
  3. Confirm each employee's Benefit Profile and its effective date.
  4. Confirm each employee has a current pay rate (Rate of Pay safe harbor only).
  5. Confirm each eligible employee has an enrollment or a waiver.

Part Two: Review the ACA Data Summary

  1. Recalculate the ACA Timeline for every employee you corrected.
  2. Work through the ACA Data Summary for the period and the month ahead.
  3. Spot-check the Form 1095-C codes for the employees you reviewed.

Part One: Review This Period's Employee Events (Steps 1–5)

Most ACA errors start with an employee event that was entered late, entered incorrectly, or never reflected in the employee's ACA settings. Part One finds every event from the period you are reviewing and confirms each affected employee is set up correctly.

Step 1: List This Period's Employee Events

Start by building the list of employees who need review. Anything that could change an employee's eligibility belongs on this list.

  • Run the ACA Monthly Review report. Go to Team Tab > My Team > Employee Information and open the ACA Monthly Review saved view. It includes Employee Type, the Hired, Re-Hired, and Terminated dates, Current ACA Profile (Effective), ACA Profile (Effective Date From), Current Benefit Profile (Effective), Benefit Profile (Effective Date From), and each employee's hourly and salary rates.
  • Filter to the period. Include every employee hired, rehired, or terminated during the period you are reviewing. Exporting the report makes this easier.
  • Add status changes. Include anyone whose Employee Type changed during the period, such as a part-time employee moving to full-time, or a transfer that moved a full-time employee into a part-time role. If an employee's Employee Type and ACA Profile do not agree, their ACA Profile needs to be updated in Step 2.
  • Keep the list. You will use it for Steps 2 through 5 and again in Step 8.

Tip
Tip: To see job changes directly, you can also use the Job Change History report filtered to Employee Type changes. Corrections to a mistyped Employee Type aren't clearly shown there, so the ACA Monthly Review report remains the more reliable place to compare Employee Type and ACA Profile.

Step 2: Review ACA Profile Assignments

The ACA Profile tells the system whether an employee is full-time, part-time, variable-hour, or a non-employee, and drives the codes on the employee's ACA Timeline. Employees assigned the Part-Time Employee or Non-Employee ACA Profile are not included in your Form 1094-C full-time employee count.

  • New hires and rehires. Confirm the ACA Profile matches the status the employee was hired into. For a new hire, the profile can be set on the base record.
  • Status changes. Confirm a new ACA Profile record was added as of the date the status changed. Do not overwrite the earlier record, or the employee's history for earlier months will be lost.
  • Profile and Employee Type agree. Confirm the Current ACA Profile matches the Employee Type, such as a full-time Employee Type with the Full-Time Employee ACA Profile.

To update an ACA Profile, open the employee's ACA tab and select Manage Employee's ACA Timeline in the upper right corner of the ACA Timeline Overview widget. See the Reference section below for examples.


Step 3: Review Benefit Profile Assignments

The Benefit Profile does two things: it allows the employee to enroll in benefits, and it tells the system when the employee became eligible for ACA purposes. An incorrect effective date can make it look like an employee was eligible, and not offered coverage, for months they were not.

  • New hires and rehires. Confirm a new Benefit Profile record was added with an effective date that follows your waiting period. Do not fill in the 12/31/1900 base record, which would show the employee as eligible since 1900.
  • Part-time to full-time changes. Confirm a new record was added as of the date the employee became eligible under your waiting period.
  • Terminations and full-time to part-time changes. Confirm the Benefit Profile ends as of the date eligibility ended under your plan's termination rule.

The Benefit Profile can be found in the employee's ACA tab, if available, or in the Profiles & Manager Assignment tab. See the Reference section below for worked date examples.

Step 4: Confirm Pay Rates

This step applies only if you use the Rate of Pay safe harbor. Under Rate of Pay, the system uses each employee's hourly or salary rate to decide whether coverage was affordable and which code to report. If you use the Federal Poverty Line safe harbor, you can skip this step.

  • Every employee on your list has a rate. Using the hourly and salary rate columns in the ACA Monthly Review report, confirm each new hire and rehire has a current rate.
  • Rate changes are dated correctly. If an employee's rate changed during the period, confirm the new rate starts on the correct date.
  • Watch for decreases. A lower hourly rate can make coverage unaffordable under the Rate of Pay safe harbor. If an employee's rate dropped, confirm their employee contribution is still affordable at the new rate.

Step 5: Review Offers, Enrollments, and Waivers

The system looks at each employee's benefit plan records to determine whether coverage was offered and whether the employee enrolled. A full-time month with no enrollment and no waiver is reported as no offer of coverage, which is the most common cause of IRS penalty letters.

  • Every newly eligible employee has a record. Each employee who became eligible during the period should have either a medical enrollment or a waiver record by the end of their waiting period.
  • Always record waivers. A waiver record is your evidence that coverage was offered even though the employee declined it.
  • Coverage dates are correct. Confirm Coverage Effective From and Coverage Effective To dates for enrolled employees, including end dates for terminated employees.

The easiest way to review this is the Benefit Plans report (Team Tab > Benefits > Benefit Plans), filtered to Benefit Type equals Medical.

Part Two: Review the ACA Data Summary (Steps 6–8)

Part One checks the employees you know had events. Part Two checks everyone, using the system's own view of your ACA data. The ACA Data Summary report is the single most useful report for ongoing review: it breaks your data down month by month, and every number in it can be clicked to see the employees behind it.

Step 6: Recalculate Corrected Employees

The system automatically recalculates every employee's ACA Timeline on the 7th of each month. Changes you make between those dates do not appear in the timeline or the ACA reports until the next automatic recalculation, so recalculate manually after correcting an employee and before you review the report.

  1. Go to Team Tab > HR > ACA > Employee ACA Actions.
  2. Select each employee you corrected in Part One.
  3. Click Recalculate.
    1. Do not click Clear. Clearing a timeline erases all of its data, including manual edits, and it cannot be recovered.
    2. If you corrected many employees, you may recalculate everyone instead. See Step 5 of the Year-End checklist for guidance on large recalculations.

Step 7: Work Through the ACA Data Summary

Go to Team Tab > HR > ACA > ACA Data Summary and select the current tax year. Each row is one month. Review the month you are checking and the month ahead, starting with Compliance Alert. For any number that is not zero, or that looks wrong, click it to see the list of employees behind it.


ColumnWhat it shows for the monthWhat to do
Month, YearThe month each row coversReview the month you are checking and the month ahead
HoursHours recorded across all employeesA sudden jump or drop with no matching event can mean hours are not coming through correctly
ACA Status Full-TimeEmployees who were full-timeConfirm the count is reasonable and that each full-time employee has an offer or a waiver
ACA Status PTEmployees who were part-timeConfirm no one listed should be full-time
Affordable Plan OfferedEmployees who were offered an affordable planCompare against ACA Status Full-Time. A full-time employee missing here may need an offer, a waiver, or, under Rate of Pay, a pay rate
Minimum Value Plan OfferedEmployees who were offered a plan providing minimum valueCompare against ACA Status Full-Time the same way
Compliance AlertEmployees with a possible compliance problem, such as a full-time month with no offer of coverage. This is the most important columnOpen each employee, find the cause using Part One, correct it, and recalculate
Approaching ACA FTVariable-hour employees whose hours put them on track to test full-timeBe ready to offer coverage if they test full-time at the end of the measurement period
Possible DowngradeFull-time employees whose hours put them on track to test part-timeKeep them full-time through the current stability period; change status only as of the next stability period start date
Employees Tested Next MonthEmployees whose eligibility will be tested next monthConfirm their hours look complete before testing

If hours look wrong, contact Green Leaf. Hours flow into the ACA Timeline from time and payroll based on settings in your ACA Profile, so incorrect hours usually mean that setup needs to be updated. Email benefitsupport@greenleafbizsolutions.com with the employee and month. Confirming that hours are accurate is still your responsibility, so spot-check variable-hour employees against your timekeeping records.

Step 8: Spot-Check This Month's Codes

Finish by confirming the codes for a few of the employees on your Step 1 list read the way you expect. Go to Team Tab > HR > ACA > ACA Data Detailed, or open the employee's ACA Timeline, and review the month you just checked.

  • New hires in their waiting period show Line 14 = 1H with Line 16 = 2D.
  • Months before hire or after termination show Line 16 = 2A.
  • Enrolled employees show Line 16 = 2C.
  • Full-time employees who waived show Line 16 = 2G or 2H, matching your safe harbor.
  • No full-time month shows 1H without a Line 16 code that explains it.

For the full list of patterns to check, see Step 5 of the ACA Year-End Reporting Checklist.

Reference

The sections below explain the settings used in the checklist in more detail. You do not need to read them every month.

Benefit Profile Date Examples

These examples assume a waiting period of the first of the month following 30 days, and coverage that ends on the last day of the termination month.

EventEvent dateBenefit Profile dateHow it's calculated
New hire2/5/2026Starts 4/1/20262/5 plus 30 days is 3/7; the first of the following month is 4/1
Part-time to full-time5/6/2026Starts 7/1/20265/6 plus 30 days is 6/5; the first of the following month is 7/1
Termination6/9/2026Ends 7/1/2026Coverage runs through June; eligibility ends the first day of the following month
Full-time to part-time7/6/2026Ends 8/1/2026Same rule as a termination

Why the Base Records Work Differently

Both the Benefit Profile and the ACA Profile start with a base record, but they are handled differently.

  • Benefit Profile (12/31/1900 base record). Leave this record blank and use + Add to create a new record dated when the employee actually became eligible. Filling in the base record would show the employee as eligible since 1900.
  • ACA Profile (1/1/2012 base record). Fill this record in with the status the employee was hired into. It describes the employee's status, not their eligibility, so it can apply from the start of employment. Use + Add for each later status change.


ACA Timeline Widgets

The employee's ACA Timeline shows the employee's status month by month and what will be reported on Form 1095-C. Each widget has an Info link that opens the ACA Rule Debug Information, which explains how the system arrived at each value and why an alert appears.

WidgetWhat it shows
ACA TimelineLine 14, 15, and 16 values for each month. Codes come from your ACA Profile rules but can be adjusted. Codes 1L through 1U are not generated automatically and must be selected or imported
StatusMonthly hours and the resulting full-time or part-time status. For multi-EIN companies, hours from all entities are combined
MeasurementWaiting period, initial measurement period, standard measurement period, and whether the Limited Non-Assessment Period applies
AlertsOpen compliance alerts, affordability and minimum value flags, employees approaching full-time, and possible downgrades

For a full list of codes, see the IRS Instructions for Forms 1094-C and 1095-C.


ACA Reports

All ACA reports are under Team Tab > HR > ACA. If you cannot see a report, contact your system administrator to confirm your access.

ReportUse it for
ACA Data SummaryMonthly counts, compliance alerts, and employees to be tested next month. Start here each month
ACA Data DetailedEach employee's ACA Timeline by month, including codes
Employee ACA ActionsRecalculating timelines and status changes, and importing historic data
ACA Status ChangeStatus changes by employee
ACA Account Status Change HistoryThe dates in each employee's Status Change History widget, grouped by employee
Form 1094-C Employee CountThe monthly counts that will appear in Part III of Form 1094-C


This concludes the ACA Monthly Reporting Checklist. Completing it each month keeps your data accurate as the year goes, so the ACA Year-End Reporting Checklist becomes a confirmation instead of a cleanup. If you have questions at any point, please reach out to benefitsupport@greenleafbizsolutions.com.

Alert
Please note that Green Leaf does not review your ACA data on your behalf. Reviewing and confirming your data is the responsibility of your company's designated ACA Administrator. Green Leaf is always glad to answer questions, explain what you are seeing, and help you resolve issues you find, but the review itself must be completed by your team.