Complete this checklist once per reporting year, by December 31. Green Leaf generates all Forms 1095-C and 1094-C during the first week of the new year, so your data must be reviewed and confirmed before then.

The
ACA Monthly Reporting Checklist covers the employee-level maintenance you should be doing throughout the year: benefit profiles, ACA profiles, pay rates, benefit plans, and timelines. This checklist assumes that monthly work is done. It focuses on what matters once a year: confirming company-level information, reviewing the full year for each employee, and reviewing your forms before they are mailed and filed.
If you find an issue that falls under a monthly step, correct it using the monthly checklist, recalculate the employee's ACA Timeline, and return here.
How Year-End Works with Green Leaf
Green Leaf generates, mails, and files your forms, but confirming that the underlying data is accurate is your responsibility. The table below shows who handles each stage.
| When | Who | What happens |
|---|
| Throughout the year | You | Maintain ACA data each month using the monthly checklist |
| Before year end | Green Leaf | Reaches out to confirm your ALE and ACA contact information |
| By December 31 | You | Complete Steps 1 through 6 of this checklist and resolve any issues |
| First week of January | Green Leaf | Generates your Forms 1095-C and 1094-C, then emails you that they are ready and the date your review is due |
| About two weeks after forms are generated | You | Review your forms and report any issues (Step 7) |
| After your review | Green Leaf, through Trusaic | Mails Forms 1095-C directly to each employee's address on file. No action is needed from you |
| February | Green Leaf | Files your forms, then emails you to confirm the filing and where to check its status |
| After filing | You | Check filing status in the system, resolve any errors, and report any rejections (Step 8) |
For example, if forms are generated on January 4, your review and feedback would be due around January 15. Green Leaf will confirm the exact review deadline when your forms are ready.
Part One: Before Forms Are Generated (Steps 1–6)
Complete Steps 1 through 6 before year end. These steps review your data before Green Leaf generates your forms, so they can be started at any time during the year and must be finished by December 31.
Step 1: Confirm Company Information and Plan Data
Company-level information prints on every form, so one wrong value creates errors on every Form 1095-C and on your Form 1094-C. These settings rarely change during the year, which is why the monthly checklist does not cover them.
Green Leaf will reach out before year end to confirm your ALE information and ACA contact information. You are welcome to review them before we contact you. If anything needs to be updated, email benefitsupport@greenleafbizsolutions.com.
- ALE status. Confirm your company was an Applicable Large Employer for the reporting year, meaning it averaged 50 or more full-time employees, including full-time equivalents, during the prior calendar year. To check, run the Employee Information report (Team Tab > My Team > Employee Information) and pull in your total number of employees.
- ALE group information. If your company is part of a controlled or affiliated group, confirm the name and EIN of each related company in the group. Go to Settings Tab > Global Setup > Company Setup, open the HR tab, and add the Part of the following ACA ALE Group widget. If no additional entities are listed or the widget is not available, your company is a single entity and this item and the Multiple EINs item do not apply.
- ACA contact information. Confirm the contact name and phone number that will print on Form 1094-C, along with your company's legal name, EIN, and address. In the same HR tab under Company Setup, add the ACA Settings widget to see the contact information currently on file. Green Leaf will also confirm this with you before year end.
- Multiple EINs. If you report under more than one EIN, confirm each employee is assigned to the correct EIN using the Employee Information report.
- Plan details. Go to Menu > Settings > Profiles & Policies > Benefits > Benefit Plan Designer and confirm each medical plan's dates, plan year start month, and other plan details, including whether it provides Minimum Essential Coverage and Minimum Value.
- Employee required contribution (Line 15). Know the lowest-cost, employee-only monthly premium for each plan that provides Minimum Value. You will use it in Step 7 to confirm that Line 15 on each Form 1095-C matches the codes reported.
- Affordability safe harbor. Confirm which safe harbor you rely on, Rate of Pay or Federal Poverty Line, and that your employee contribution stays under the IRS affordability percentage for the plan year. The W-2 safe harbor is not supported. Your safe harbor should be on file with your plan records; if you are not sure which one you use, contact Green Leaf and we will provide it.
- ACA Profile rules (optional). To review your ACA Profile settings, go to Menu > Settings > Profiles & Policies > ACA (Affordable Care Act) and click the pencil icon on a profile. Confirm the measurement method, measurement and stability period lengths, waiting period, and Limited Non-Assessment Period rule still match your eligibility policy.
Step 2: Validate the Full-Year Employee Population
Every person who was full-time for at least one month of the year needs a Form 1095-C, including employees who have since terminated. The monthly reviews look at who is active today; this step looks back at everyone who worked during the year.
- Pull the full year. Run the Employee Information report (Team Tab > My Team > Employee Information) using the ACA Year-End Review saved view. It includes hired, re-hired, and terminated dates, ACA Profile, Benefit Profile, Employee Type, status, entity, and the other fields you need for this review. We recommend exporting the report and removing employees who do not apply to the tax year, such as those hired after the tax year ended or terminated before it began, so you are reviewing only employees who worked during the year. Terminated employees are the group most often missed.
- Compare to payroll. Compare your total employee count from Step 1 against the employees paid during the year. Anyone paid but missing from your list, or on your list but never paid, needs review.
- Confirm who gets a 1095-C. Every employee who was full-time for any month must receive a form. If you sponsor a self-insured plan, every enrolled employee also receives a form, even if they were part-time all year. Keep this list: in Step 7 you will reconcile it against the Forms 1095-C Green Leaf generates to confirm the right employees received one.
- Check employee types against ACA Profiles. Using the same export, look for employees whose Employee Type and ACA Profile disagree for any part of the year, such as a full-time employee type paired with a Part-Time Employee ACA Profile. Correct these using Step 2 of the monthly checklist.
- Review status changes in aggregate. Run the ACA Status Change and ACA Account Status Change History reports for the full year. Confirm every hire, termination, rehire, and full-time or part-time change landed in the correct month.
- Confirm Non-Employee assignments. Using the Employee Information report, review everyone assigned the Non-Employee ACA Profile, such as contractors or non-employee directors, and confirm that assignment is intentional. These records are excluded from your employee counts.
Step 3: Close Out Measurement Periods and Set Up Next Year
If you use the look-back measurement method, the end of the year is when a standard measurement period typically closes and decides who is full-time for all of next year. Errors here affect both this year's forms and next year's offers of coverage.
- Confirm hours are complete. Make sure every month of hours for variable-hour, seasonal, and part-time employees is loaded through the end of the measurement period. You can check an individual employee's hours on the ACA Timeline in their profile, or see a monthly summary of hours across all employees in the ACA Data Summary report (Team Tab > HR > ACA > ACA Data Summary).
- Review measurement period results. Employees who averaged 130 or more hours per month during the measurement period show an ACA status of full-time. In the ACA Data Summary report, click the number in the ACA Status FT column for any month to see the employees who are full-time in that month. Confirm each one will be treated as full-time for the upcoming stability period.
- Offer coverage during the administrative period. Confirm that employees who tested full-time will be offered coverage effective the first day of the new stability period. Coordinate with open enrollment so the offer, and any waiver, is recorded in time.
- Review initial measurement periods in progress. New variable-hour hires will have initial measurement periods that span the year end. Confirm their start dates and that they will be tested in the correct month.
- Resolve downgrades. Review employees flagged as Possible Downgrade in the ACA Data Summary report. An employee who was full-time in the prior stability period but tested part-time should move to the new status only as of the new stability period start date, not earlier.
- Review breaks in service. For every employee rehired during the year, confirm whether they returned as a continuing employee or a new employee. The IRS break-in-service rule is required for all employers: an employee who returns after a break of 13 or more consecutive weeks may be treated as a new employee (26 weeks for educational organizations). An employee who returns after a shorter break is a continuing employee, and their prior full-time status carries over. Employers may also apply the optional rule of parity, which allows a break of at least 4 weeks to be treated as a new hire if the break is longer than the employee's prior period of employment. If you are unsure how these rules apply to an employee, contact Green Leaf.
Step 4: Reconcile Coverage Offers and Enrollment for All 12 Months
The IRS assesses penalties month by month, so every full-time month needs evidence of an offer. The monthly checklist confirms that benefit plan records exist; this step confirms they line up with your carrier and payroll records for the entire year.
Two reports cover most of this step, so you do not need to review employees one at a time:
- Benefit Plans (Team Tab > Benefits > Benefit Plans) shows the coverage each employee had. Filter to Benefit Type equals Medical to see only medical coverage.
- ACA Data Detailed (Team Tab > HR > ACA > ACA Data Detailed) shows each employee's ACA Timeline by month in a report view. Filter to the tax year being filed.
Then review the following:
- Account for every full-time month. In the ACA Data Detailed report, confirm that each employee who was full-time in any month has either an enrollment record or a waiver record covering that month. Full-time months with neither will report as no offer.
- Reconcile against carrier data. Compare medical enrollment in the Benefit Plans report to your carrier's enrollment or billing records for the year. Look for employees enrolled with the carrier but missing in the system, and the reverse.
- Reconcile against payroll deductions. Using the Benefit Plans report, confirm that employees with medical deductions have matching enrollment records, and that deduction dates align with Coverage Effective From and Coverage Effective To dates.
- Check terminations. Confirm coverage end dates for terminated employees match your plan's termination rule. Months of COBRA coverage after employment ends are not reported as an offer of active coverage.
- Tell Green Leaf about COBRA coverage. Green Leaf does not track COBRA coverage or review reports to identify it, so COBRA information must come from you. This applies both to individuals whose only coverage during the year was COBRA and to employees whose existing Form 1095-C also needs to reflect COBRA months. For each person, please send the employee's name, the months they had COBRA coverage, and the COBRA rate to benefitsupport@greenleafbizsolutions.com before December 31. Because Green Leaf reports COBRA exactly as you provide it, please be as specific and complete as possible.
- Check dependent and spouse offers. In the ACA Data Detailed report, confirm your Line 14 codes reflect whether coverage was offered to spouses and dependents. If your plan offer changed mid-year, confirm the change appears in the correct month.
- Self-insured plans only: covered individuals. In the Benefit Plans report, filter to Employee + Spouse, Employee + Children, and Employee + Family coverage levels and add the spouse and dependent columns. Confirm every covered spouse and dependent is listed with a name, SSN, and date of birth, and that each person's covered months are correct. This information prints in Part III of Form 1095-C.
Step 5: Audit Form 1095-C Codes Across the Full Year
The monthly checklist reviews each employee's timeline one month at a time. At year end, review the full 12-month pattern on each form, because most IRS penalty letters trace back to code combinations that only look wrong when viewed across the year.
Recalculate first. Before your final review, recalculate every employee's ACA Timeline so it reflects the latest data. Do not continue to the reviews below until everyone has been recalculated.
- Go to Team Tab > HR > ACA > Employee ACA Actions.
- Remove any filters on the report so all employees are included.
- Check the select-all box, then click Recalculate.
- You do not need to use Recalculate Combined ACA Timelines if that option appears.
- Do not click Clear. Clearing a timeline erases all of its data, including your manual edits, and they cannot be recovered.
- Recalculating can take some time. If you have more than about 500 employees, we recommend recalculating in batches, such as by entity or department.
Review alerts for the full year. Clear or document every open Compliance Alert for every month, not just the current month. Review these in the ACA Data Summary report (Team Tab > HR > ACA > ACA Data Summary). Alerts also appear in ACA Data Detailed, but they are much easier to see in the summary view.
Review the codes. Run the ACA Data Detailed report for January through December and sort by employee. Then review the codes for the patterns below.
| Check | What to look for | Why it matters |
|---|
| Full-time with no offer | Line 14 = 1H in a month the employee was full-time, with no Line 16 code that explains it | This is the most common trigger for an IRS penalty letter |
| Months not employed | Whole months before hire or after termination show Line 16 = 2A | Without 2A, those months can look like a full-time employee with no offer |
| Waiting periods | Months in a new hire's waiting period show 1H with 2D | Shows the IRS the employee was not yet required to be offered coverage |
| Enrolled employees | Months the employee was enrolled show 2C | 2C confirms enrollment and takes priority over affordability codes |
| Affordability safe harbor | Waived months for full-time employees show 2G or 2H, matching the safe harbor confirmed in Step 1 | A missing or mismatched code removes protection for unaffordable months |
| Line 15 amounts | An amount is present for every month with an offer code that requires one (such as 1B, 1C, 1D, 1E, 1J, or 1K) and matches the rate confirmed in Step 1. Line 15 is blank for 1A | Wrong or missing amounts can make an affordable offer look unaffordable |
| Plan start month | The plan start month on each form matches your plan year | This field is required on every Form 1095-C |
| Manual overrides | Codes changed by hand in the timeline still make sense after the final recalculation | Overrides can be lost or become outdated when data changes later |
Step 6: Confirm Employee Data for Mailing and Filing
Forms 1095-C are mailed directly to each employee's address on file, and the IRS matches each form to the employee's name and SSN. Bad identifying data leads to undelivered forms and rejected filings, even when the coverage codes are correct.
- Mailing addresses. Confirm a current address for every employee who will receive a form, with extra attention on terminated employees. Request updated addresses now, because forms are mailed to the address on file without further review.
- Names and SSNs. Confirm every employee receiving a form has a legal name and a valid nine-digit SSN. Run the Employees with Invalid SSN report (Team Tab > HR > Reports > HR Maintenance > Employees with Invalid SSN) to find missing or invalid SSNs. Also look for placeholders such as 000-00-0000 or 123-45-6789 and names that do not match payroll records. For any employee whose name changed during the year, confirm the new name is updated in the system and that you have documentation showing the change was also updated with the Social Security Administration. The IRS matches names to SSA records, so a name updated in one place but not the other can cause a filing error.
- Covered individuals (self-insured plans only). Confirm each covered spouse and dependent has a legal name, SSN, and date of birth. There is no report that flags invalid or placeholder SSNs for dependents, so these must be reviewed manually. Use the Dependents report (Team Tab > Benefits > Dependents) and filter to medical plans to review every dependent tied to a medical plan.
Part Two: After Forms Are Generated (Steps 7–8)
Steps 7 and 8 cannot begin until the new year, and Green Leaf will email you before each one starts. When your Forms 1095-C and 1094-C have been generated, we will email you that they are ready for review and the date we need your response by. This will be your notice to begin working on Step 7 below. We will not move forward with mailing or filing until that date has passed. If we have not heard from you by then, your forms will be treated as approved. Once your forms have been filed, we will email you again to confirm the filing and explain where to check its status.
Step 7: Review Your Generated Forms
After Green Leaf generates your forms in the first week of the new year, you will have about two weeks to review them and report any issues. Once the review window closes, forms are sent for mailing, so this is your last chance to make corrections before employees receive them.
Form 1095-C
Go to Team Tab > HR > ACA > Forms > Employee Forms 1095-C. Confirm the selected year is the tax year you are reviewing. The report generally defaults to the newest tax year, but check it each time you open it.
- Spot-check a sample. Review forms for at least one new hire, one termination, one rehire, one variable-hour employee, and one employee who changed status during the year. Also review any unusual situations, such as employees with a lapse in coverage, multiple status changes, or anything else where you want to confirm the coding reads correctly.
- Confirm the codes. Check that each sampled form follows the patterns in Step 5 and that Line 15 shows the correct monthly amount.
- Confirm the count. Make sure every employee you identified in Step 2 has a form, and no one received a form in error.
Form 1094-C
Go to Team Tab > HR > ACA > Forms > Employer Forms 1094-C. As with Form 1095-C, confirm the selected year is the tax year you are reviewing.
- Full-time employee count. Confirm each month's full-time count matches the number of employees reported as full-time on Forms 1095-C for that month. A large jump or drop should match a real event, such as seasonal hiring or a measurement period result.
- Total employee count. Confirm each month's count includes all employees, full-time and part-time.
- Minimum Essential Coverage offer indicator. Confirm it shows Yes only for months when coverage was offered to at least 95% of full-time employees and their dependents.
- Company and contact information. Confirm the information printed matches what you confirmed in Step 1.
Report Issues Before the Deadline
Send any corrections or questions to benefitsupport@greenleafbizsolutions.com before your review deadline. If you have no changes, let us know your forms are approved.
- Issues reported before the deadline. Green Leaf will work diligently to correct them before your forms are mailed and filed.
- Need more time. If you need an extension for your review, you must request it before the deadline. Extensions cannot be granted after forms are finalized.
- No response by the deadline. If we have not heard from you, your forms will be treated as approved, and Green Leaf will move forward with mailing and filing.
- Issues found after the deadline. Once forms are finalized, changes require corrected forms, which follow a separate correction process and cannot be turned around immediately. See the correction timeline in Step 8. Please complete your review on time to avoid this.
Step 8: After Filing
Green Leaf files your forms with the IRS, and with any applicable states, in February and will notify you once your filings are submitted. From that point, monitoring your filing status and resolving errors is your responsibility. Green Leaf does not monitor filing errors or send them to you; they appear directly in the system.
To check your filing status:
- Go to Team Tab > HR > ACA > ACA Year End Processing.
- Select the current tax year.
- Click the pencil icon next to the entity you want to review. Each entity has its own filing, so repeat these steps for every entity.
- Review the status of both the federal and state filings.
| Status | What it means | What you need to do |
|---|
| Pending | The filing has been submitted and is waiting on a response | Check back until the status updates |
| Accepted | The filing was received with no errors | No action needed |
| Accepted with Errors | The filing was received, but some records contain errors | Review and resolve each error in the system |
| Rejected | The filing was not accepted | Notify Green Leaf at benefitsupport@greenleafbizsolutions.com so we can review and provide next steps |
- Check every entity. Confirm the federal and state status for each entity until every filing shows Accepted or Accepted with Errors.
- Resolve errors. For any filing Accepted with Errors, review and resolve each error, such as name and SSN mismatches.
- Report rejections. If any filing is Rejected, notify Green Leaf right away.
- Plan for corrections. If you find an error after forms are mailed or filed, contact Green Leaf so a corrected form can be prepared. Corrections for a tax year are handled through September 30 of the year the forms are filed, following the timeline below. IRS notices are handled separately and are accepted at any time.
- Keep your records. Retain the reports used in this review, plan documents and rates, waiver records, and final forms for at least six years. This matches the period during which the IRS can assess employer shared responsibility penalties.
Correction timeline for the prior tax year
| When you contact us | What to expect |
|---|
| From filing through May 31 | Standard correction window. Send all corrections, and answer any follow-up questions, by May 31 so they can be completed in time |
| June 1 through September 30 | Corrections are still accepted, but are handled on a best-effort basis and may take longer |
| October 1 through December 31 | Prior-year corrections are accepted only on a case-by-case basis, because Green Leaf is preparing the current tax year's filings during these months |
| Any time | IRS notices about a prior tax year, such as Letter 226-J, are accepted at any time. Send them to us right away, since they have short response deadlines |
This concludes the ACA Year-End Reporting Checklist. Use it alongside the monthly checklist: the monthly reviews keep each employee's data accurate as the year goes, and this review confirms the full year is complete before your forms are generated. If you have questions at any point, please reach out to benefitsupport@greenleafbizsolutions.com.

Please note that Green Leaf does not review your ACA data on your behalf. Reviewing and confirming your data is the responsibility of your company's designated ACA Administrator, who is expected to complete this checklist each year. Green Leaf is always glad to answer questions, explain what you are seeing, and help you resolve issues you find, but the review itself must be completed by your team.